How Do I Turn On the Large Screens?

The three large screens are controlled by a single remote with a toggle switch to define which projector is being controlled by the remote. The toggle switch is located to the right of the screens on the wall. Each projector can be operated separately using the toggle switches. To power on a projector, use the toggle switch to determine which projector is to be controlled. Then while pointing the remote at the toggle switches, press the red power button. Repeat until all desired screens are powered on.

For Standard Single Screen Viewing

- used for single screen presentations

1. Hold the Center screen toggle switch down.
2. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
3. Release Center screen toggle switch.

Note: It will take a few seconds for the image to appear while the projector warms up. "Optima" will appear on screen while this is taking place.

For Standard Three Screen Viewing

- used for three screen presentations

1. Hold Left Screen toggle switch down.
2. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
3. Release Left screen toggle switch.
4. Hold Center screen toggle switch down.
5. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
6. Release the Center screen toggle switch.
7. Hold Right screen toggle switch down.
8. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
9. Release the Right screen toggle switch.

Note: It will take a few seconds for the image to appear while the projector warms up. "Optima" will appear on screen while this is taking place.

For Single Screen Stereo Projection

- used to display 3D images

1. Hold Center Screen toggle switch up.
2. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
3. Hold Center screen toggle switch down.
4. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
5. Release Center screen toggle switch.

Note: It will take a few seconds for the image to appear while the projector warms up. "Optima" will appear on screen while this is taking place.

For Stereo Three Screen Viewing

- used for 3D images on all screens

1. Hold Left Screen toggle switch up.
2. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
3. Hold Left screen toggle switch down.
4. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
5. Release Left screen toggle switch.
6. Hold Center screen toggle switch up.
7. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
8. Hold Center screen toggle switch down.
9. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
10. Release the Center screen toggle switch.
11. Hold Right screen toggle switch up.
12. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
13. Hold Right screen toggle switch down.
14. While pointing the remote at the toggle switches, press the Red Power Button on the projector remote.
15. Release the Right screen toggle switch.

Note: It will take a few seconds for the image to appear while the projector warms up. "Optoma" will appear on screen while this is taking place.